AC Safety Guide: Why does an AC fire or blast occur, and easy ways to avoid it

AC Safety Guide: Most people think that AC bursts suddenly, whereas the truth is that many technical reasons behind it develop gradually.

 

 

 

 

 

AC Safety Guide: Temperatures in many parts of the country have surpassed 40 degrees Celsius. As a result, air conditioners in homes, offices, and shops are running continuously for hours. ACs have become a necessity for relieving the heat, but every summer, incidents of AC fires or explosions occur. These incidents raise questions about whether it's safe to use an AC for extended periods of time.

In reality, AC explosions or fires are rare, but when they do happen, there are often warning signs that are often overlooked.

After all, what is the reason for AC blast?

Most people think that ACs blow out suddenly, but the truth is that many technical reasons behind this problem develop gradually. Faulty wiring is one of the most common causes. Loose electrical wires, overloaded circuits, or old electrical parts can generate excessive heat. This heat can eventually lead to fires or explosions.

Additionally, leaking refrigerant gas can increase the risk. Dirty filters and dust-clogged coils can reduce the AC's efficiency, forcing the machine to work harder than normal and increasing the risk of overheating.

Why is regular servicing important?

AC maintenance is just as important as any vehicle. If left unserviced for a long time, minor issues can escalate into major problems. Over time, dust builds up in filters, vents, and coils, restricting airflow. This puts additional pressure on the compressor and other components. This persistent pressure can overheat the system and cause serious damage.

According to experts, ACs should be professionally serviced at least once a year. This helps detect potential faults early and prevent major accidents.

Pay special attention to the power system as well.

Air conditioners consume a lot of power, especially during peak summers. Therefore, connecting an AC to an overloaded circuit or a low-quality extension board can be dangerous.

If voltage fluctuations occur frequently in your area, using a stabilizer may be a good option. Proper home earthing is also crucial, although many people overlook this aspect.

Never ignore these warning signs

An AC usually gives off some warning signs before it breaks down. If the AC starts emitting a burning smell, unusual noises, frequent power outages, excessive vibration, or a sudden decrease in cooling, don't dismiss it as a minor problem. All these signs indicate a technical fault within the system that needs to be investigated immediately.

What to do if AC gets too hot?

If you notice your AC is heating up unusually or behaving abnormally, first turn it off. If possible, disconnect the power supply. Do not attempt to inspect the AC yourself. Modern air conditioners contain high-voltage electrical parts and pressurized gases, which can cause accidents. In such a situation, the safest option is to seek the help of a trained technician.