Tech Tips: If you feel a slight shock or electric shock while touching the washing machine, do not ignore it, thinking it is a normal mistake.

(If you see these signs in your washing machine, don't ignore them)

Tech Tips: Washing machines have become a necessity in almost every household these days. These machines, which make everyday laundry easier, are often overlooked until a major problem arises. Sometimes, minor malfunctions can lead to serious accidents. Problems like electric shock, fire, or water leaks not only damage the machine but can also pose a threat to the safety of the people in the house. Let's learn about five common washing machine problems that can be costly if ignored.

Feeling electric shock when touching the machine

If you feel a slight shock or electric shock when you touch the washing machine , don't dismiss it as a simple fault. This can often be a sign of poor earthing, internal wiring problems, or water getting into the machine's electrical components.

Show Quick Read

Key points generated by AI, verified by newsroom

What is the danger?

Electric shock problems can worsen over time, and this situation can be extremely dangerous, especially for children and the elderly.

Solution

• Get the earthing of the house checked.
• Replace damaged or broken wires immediately.
• Get the machine checked by an authorized technician.
• Repairs related to wiring or earthing can usually cost between Rs 500 and Rs 2,500.

A burning or melted plastic smell coming from the machine

If a burning smell starts coming from your washing machine, stop using it immediately. This could be due to an overheating motor, melted wires, a bad capacitor, or excessive belt friction.

What is the danger?

Such a situation can lead to electrical short circuits and fire incidents, as well as complete motor failure.

Solution

• Switch off the machine immediately.
• Have the motor and wiring professionally inspected.
• Replace defective parts
• Depending on the problem, the repair cost can range from Rs 1,000 to Rs 5,000.

Water leakage around the machine

Water accumulation under or around your washing machine often indicates a problem with the pipes, hoses, or door seals. Many people consider this a minor issue, but it can become a serious problem.

What is the danger?

Leaking water can reach electrical components and cause a short circuit. Furthermore, slippery floors can also pose a risk of injury.

Solution

• Replace leaking pipes or hoses.
• Get the door seal checked and get a new one installed if needed.
• Tighten all connections properly.
• Usually, this problem can be fixed between Rs 300 and Rs 2,000.

Excessive shaking or loud noises

If the machine shakes too much or makes unusual noises during spin mode, it could be a sign of a technical fault.

Possible causes

• Unbalanced load of clothes
• worn shock absorbers
• Drum bearing failure

What is the danger?

Constant vibration can damage the machine's internal parts, shortening its lifespan and increasing the risk of falls.

Solution

• Place the machine on a flat surface.
• Replace faulty suspension or shock absorbers.
• Use new parts with rubber protection.
• This type of repair can cost anywhere between Rs 800 and Rs 4,000.

MCB trips as soon as the machine is started

If the MCB trips repeatedly or the power goes off as soon as the washing machine is switched on, then ignoring it can be very dangerous.

Possible causes

Short circuit inside the machine

Heating element malfunction

motor failure

What is the danger?

This problem can cause fire and damage the electrical wiring of the house.

Solution

• Unplug the machine immediately.
• Have it checked by a certified technician.
• Get faulty electrical parts replaced.
• The cost of such repairs can range from Rs 1,500 to Rs 6,000.

Important tips to keep your washing machine safe

Keep these things in mind to increase the life of your washing machine and avoid accidents.

• Get the machine serviced every 6 to 12 months.
• Do not put more clothes in the drum than required.
• Always use a socket with proper earthing.
• Keep the area around the machine dry.
• Replace the damaged power cord immediately.
• Do not leave the machine running unattended for long periods of time.