A lot changes with the arrival of the winter season. People start eating hot things, wearing warm clothes, replacing AC coolers, and fans, with blankets and quilts, etc. At the same time, if you drive a two-wheeler, you feel extremely cold. That's why people wear jackets etc. to protect themselves from cold. Similarly, the effect of winter is also seen on water, because water becomes extremely cold. In such a situation, people are neither able to wash utensils nor clothes with this cold water and even face a lot of problems in bathing. In such a situation, many people heat water by using a water-heating immersion rod but keep in mind that whenever you use this rod, do not commit any mistakes. Otherwise, a major accident may occur. So let us know what these things are. You can know about this in the next slides...
Do not make these mistakes while using the rod:-
First mistake
When you turn on the rod to heat water, do not go barefoot to the place where the rod is installed. Always go wearing slippers, because if you move the rod or try to touch it without wearing slippers, you may get electrocuted. So keep that in mind.
Second mistake
Where you have installed the rod to heat water. Do not go to that place with wet feet or touch the moving rod. If you make this mistake, you may get electrocuted. Therefore always take special care of this.
Third mistake
Many people start the rod and start their work. In such a situation, if children accidentally touch the moving rod or put their hands in the hot water, a major incident can happen. Therefore, always operate the rod out of the reach of children.
Fourth mistake
When you use a rod for a long time, sometimes its wire gets cut or other problems occur. In such a situation, many people start fixing it by themselves. But during this time, keep in mind that if the wires are connected wrongly, a short circuit may occur. Therefore, if you do not have the information, get help from an electrician.
(PC: iStock)
